Справочник Пользователя для 3com 3CRWXR10095A

C

HAPTER

 16: M

ONITORING

 

THE

 N

ETWORK

The 3WXM Services is configured to provide data for the Explore and 
Status Summary windows by default. To provide data to the client and RF 
windows, you must enable the service to poll WX switches for client and 
RF data. You also can enable the service to receive SNMP traps generated 
by the WX switches. (See “Changing Monitoring Settings” on page 500.)

To enable the 3WXm service to monitor network data, you or the 3WXM 
Services administrator must specify the WX switches to monitor. The 
3WXM Services collects data from the switches and updates the 
information in the windows of the Monitor tab on 3WXM clients.

To specify the WX switches to monitor, you upload their configuration 
into 3WXM or add them to the network plan. In addition, SNMP traps 
must be enabled on the WX switches.

By default, the 3WXM Services supplies data to all of the windows within 
the Monitoring tab. This data is refreshed at regular intervals, according 
to the polling interval configured for the 3WXM Services. The default 
polling interval is 5 minutes.

You can optionally disable the 3WXM Services from supplying data to 
specified windows. To configure the 3WXM Services for monitoring, see 
“Changing Monitoring Settings” on page 500. To enable SNMP traps on 
WX switches, see “Configuring SNMP” on page 187.

Data provided by 3WXM Services is displayed in the Monitor tab in the 
Content panel. To access the data, 3WXM client must have a connection 
with the host running the 3WXM Services.

1 Enable the 3WXM client to access the 3WXM Services, if you have not 

already done so.

2 Select the Monitor option in the main 3WXM tool bar.

By default, the Explore view of the Network Plan is displayed.