Справочник Пользователя для 3com 3CRWXR10095A

C

HAPTER

 5: P

LANNING

 

THE

 3C

OM

 M

OBILITY

 S

YSTEM

You can group several objects in a drawing to specify them as one RF 
obstacle. For example, if a wall consists of several lines, the lines can be 
grouped. If you subsequently ungroup the objects, the RF obstacle 
information is removed.

1 Select an object on the floor. 

2 Press Shift while clicking additional objects.

3 Click the 

 (group objects) icon on the toolbar. The grouped objects 

now appear as one object group.

4 Right-click, and select Create RF Obstacle. The Create RF Obstacle 

dialog box appears. See “To use the Create RF Obstacle Dialog box”.

The Create RF Obstacle dialog box is shown in Figure 4.

Figure 4   Create RF Obstacle Dialog Box

1 In the Description box, type a description for the RF obstacle (1 to 60 

characters, with no tabs).

2 In the Obstacle Type list, select the material of which the RF obstacle is 

made. 

Select Other if the material is not listed. This allows you to create your 
own obstacle type.