Справочник Пользователя для 3com 3C17501

C

HAPTER

 1: S

WITCH

 8800 C

OMPONENTS

The Switch 8800 power supplies are installed at the bottom of the chassis, in the 
front. Only one AC power supply is required for each Switch 8800 chassis, 
although 2 power supply slots are provided to implement 1+1 redundancy. 

The 7-slot chassis uses a 1200 W auto-ranging power supply (3C17506). 

The 10- and 14-slot chassis use a 2000 W auto-ranging power supply (3C17507). 
When this power supply is used at 110 V, it delivers 1200 W of power, when used 
at 220 V, it delivers 2000 W of power.

Figure 7 illustrates the 1200 W power supply for the Switch 8800.

Figure 7   Switch 8800 Power Supply 

Table 22 describes the power supply LEDs.

Table 23 describes the specifications of the power supply for the Switch 8800 
chassis.

Table 22   Power Supply LED Status

INPUT

ON — The power switch in the ON position and power input is normal.

 

OFF — No power is being supplied.

OUTPUT

ON — Power output is normal.

 

OFF — Power output is not normal.

FAIL

ON — The power supply is not operating normally.

 

OFF — The power supply is operating normally.

Table 23   Specifications for the Switch 8800 Power Supply

Input

100 to 240 V, 50 to 60 Hz

Maximum tolerance

90 to 264 VAC, 47 to 63 Hz

Maximum input 
current

14 A

Maximum output

1200 W

1200 W (90 to 160 V)

2000 W (160 to 264 V)

Lightning protection

Lightning protection must be provided for all chassis.