Справочник Пользователя для 3com 2226-SFP

Скачать
Страница из 108
Physical Features
11
Figure 3   3CBLSF50 Front and Rear Panels
Front Panel
The front panel of the Switch contains a series of 
indicator lights (LEDs) that help describe the state of 
various networking and connection operations.
(1) RJ-45 10/100 Ports
WARNING: RJ-45 Ports. These are shielded RJ-45 data 
sockets. They cannot be used as standard traditional 
telephone sockets, or to connect the unit to a 
traditional PBX or public telephone network. Only 
connect RJ-45 data connectors, network telephony 
systems, or network telephones to these sockets.
Either shielded or unshielded data cables with shielded 
or unshielded jacks can be connected to these data 
sockets.
AVERTISSEMENT: Points d’accès RJ-45. Ceux-ci sont 
protégés par des prises de données. Ils ne peuvent pas 
être utilisés comme prises de téléphone conventionnelles 
standard, ni pour la connection de l’unité à un réseau 
téléphonique central privé ou public. Raccorder 
seulement connecteurs de données RJ-45, systèmes de 
réseaux de téléphonie ou téléphones de réseaux à ces 
prises.
Il est possible de raccorder des câbles protégés ou non 
protégés avec des jacks protégés ou non protégés à ces 
prises de données.
WARNHINWEIS: RJ-45-Porte. Diese Porte sind 
geschützte Datensteckdosen. Sie dürfen weder wie 
normale traditionelle Telefonsteckdosen noch für die 
Verbindung der Einheit mit einem traditionellem 
privatem oder öffentlichem Telefonnetzwerk gebraucht 
werden. Nur RJ-45-Datenanscluße, Telefonnetzsysteme 
or Netztelefone an diese Steckdosen anschließen.
Entweder geschützte oder ungeschützte Buchsen dürfen 
an diese Datensteckdosen angeschlossen werden.
The Switch has 24 or 48 10/100 Mbps auto-negotiating 
ports. Each port supports automatic MDI/MDI-X 
detection and can be connected to either a 10BASE-T, 
or 100BASE-TX device.
For each port, the speed and duplex mode (half duplex 
or full duplex for 10BASE-T and 100BASE-TX) are 
automatically determined by the capabilities of the 
connected device.
The 3CBLSF26PWR Switch also supports IEEE 
802.3af-2003 standard (802.3af) and pre-standard 
P802.3at DTE Power via MDI Enhancements (PoE+). 
Each port can detect connected 802.3af/at-compliant