Справочник Пользователя для 3com 2226-SFP

The Initialize command resets the device configuration 
to factory defaults, retaining the current IP 
configuration.

This command has no default configuration.

The system prompts for confirmation of the request. If 
no response is entered within 15 seconds, timeout 
occurs and the command is not executed.

The following example resets the Switch to factory 
defaults:

The Reboot command simulates a power cycle of the 
device.

This command has no default configuration.

There are no user guidelines for this command.

Select menu option: initialize

WARNING: This command initializes the system to 
factory defaults (excluding Management IP 
configuration) and causes a reset.

Do you wish to continue (yes,no)[no]: yes

Saving configuration.....Saved config to all 
units.

System rebooting..........

Select menu option: reboot

Are you sure you want to reset the system 
(yes,no)[no]: yes

Saving configuration......Saved config to all 
units.

System rebooting..........