Справочник Пользователя для 3com 10014917
3Com Switch 4200G Family
39
Command Reference
stp port priority
Use the
stp port priority
command to set the priority of the current port in a specified spanning tree
instance.
Ethernet Port view
stp priority
Use the
stp priority
command to set the priority of a switch in a spanning tree instance.
System view
stp region-configuration
Use the
stp region-configuration
command to enter MST region view.
System view
stp root primary
Use the
stp root primary
command to configure the current switch to be the root bridge of a specified
spanning tree instance.
System view
stp root-protection
Use the
stp root-protection
command to enable the root protection function for the current port.
Ethernet Port view
stp root secondary
Use the
stp root secondary
command to configure the current switch as a secondary root bridge of a
specified spanning tree instance.
System view
stp tc-protection
Use the
stp tc-protection
command to enable or disable the TC-BPDU attack prevention function for
the switch.
System view
stp timer-factor
Use the
stp timer-factor
command to set the timeout time of a switch in terms of the multiple of the Hello
time.
System view
stp timer forward-delay
Use the
stp timer forward-delay
command to set the Forward delay for a switch.
System view
stp timer hello
Use the
stp timer hello
command to set the Hello time for a switch.
System view
stp timer max-age
Use the
stp timer max-age
command to set the maximum age of a switch.
System view
stp transmit-limit
Use the
stp transmit-limit
command to set the maximum number of configuration BPDUs the current
port can transmit within a Hello time.
Ethernet Port view
super
Use the
super
command to switch the current user level to the one identified by the level argument.
User view
super password
Use the
super password
command to set the password for users to switch to a higher user level.
System view
sysname
Use the
sysname
command to set a domain name for the switch.
System view
Web command: Administration -> SNMP -> Setup
sysname
Use the
sysname
command to set the system name of the Switch.
System view
system-view
Enter
system-view
to enter the system view from the user view.
User view