Справочник Пользователя для 3com 2924-PWR

1 Connect to the switch Console port as described in “Connecting to the 

Console Port” page 23.

2 The command line interface login sequence begins as soon as the switch 

detects a connection to its console port. When the process completes, 
the Login prompt displays.

3 At the login prompt, enter admin as your user name and press Return. 

The Password prompt displays.

4 Press Return. If you have logged on correctly, Select menu option# 

should be displayed.

5 Enter the IP address and subnet mask for the switch as follows:

and press Enter.

(Note: xxx.xxx.xxx.xxx is the IP address, mmm.mmm.mmm.mmm is the 
subnet mask, and ggg.ggg.ggg.ggg is the default gateway of the switch.)

6 Enter the logout command to terminate the CLI session.

The initial setup of your switch is now complete and the switch is ready 
for you to set up your chosen management method. See “Methods of 
Managing a Switch” on page 19.

This section describes how to view the automatically allocated IP 
information using the command line interface. The automatic IP 
configuration process usually completes within one minute after the 
switch is connected to the network and powered up.

1 Connect to the switch Console port as described in “Connecting to the 

Console Port” page 23.

2 The command line interface login sequence begins as soon as the switch 

detects a connection to its console port.

3 At the login prompt, enter admin as your user name and press Return.

4 At the password prompt, press Return.If you have logged on correctly, 

Select menu option# is displayed.