Справочник Пользователя для Extreme networks 17001
Installing Summit External Power Supplies
Summit Family Switches Hardware Installation Guide
184
NOTE
For centralized DC power connection, this product is intended to be installed in restricted access locations
(dedicated equipment rooms, equipment closets, or the like) in accordance with Articles 110-16, 110-17, and 110-
18 of the National Electric Code, ANSI/NFPA 70.
(dedicated equipment rooms, equipment closets, or the like) in accordance with Articles 110-16, 110-17, and 110-
18 of the National Electric Code, ANSI/NFPA 70.
CAUTION
Do not use the rack-mount brackets to suspend the EPS-T2 from under a table top or desk, or to attach the EPS-T2
to a wall.
to a wall.
Rack-mounting the EPS-T2
To install the EPS-T2:
1
Place the EPS-T2 upright on a secure surface, with the front facing you.
2
Remove the mounting bracket kit from the packaging.
3
Attach the mounting brackets as follows:
a
Place a mounting bracket over the mounting holes on one side of the EPS-T2 (see
).
b
Insert the provided screws and fully tighten with a screwdriver.
Figure 156: Attaching the Mounting Bracket
c
Repeat steps
4
Slide the EPS-T2 into a 19-inch rack and secure it using appropriate rack-mount screws.
ES4K026