Справочник Пользователя для Extreme networks 17001
Summit Family Switches Hardware Installation Guide
207
Figure 175: Connecting the Ground Wire
Connecting the DC Power Cables
To connect the DC power cables to the Summit X650 DC PSU:
1
Verify that the DC circuit is de-energized.
2
Attach an ESD-preventive wrist strap to your bare wrist and connect the metal end to an appropriate
ground point on the rack.
ground point on the rack.
3
Slide the cover off the terminal block (
4
Connect the DC power input cables as follows:
a
On each terminal, loosen the screw enough to allow the spade terminal to slide underneath the
captive square washer.
captive square washer.
b
Slide the spade terminal of the negative wire (–48 V) under the captive square washer on the
negative
negative
terminal (labeled –48V).
c
Slide the spade terminal of the positive wire (–48 V RTN) under the captive square washer on the
positive
positive
terminal (labeled RTN).
SH_108
1
2
1 = Grounding point
2 = Ground wire
2 = Ground wire