Справочник Пользователя для StarTech.com NETRS2321EGB

Instruction Manual

10

Once you have entered the necessary parameters, press the Update button. 

NETRS2321E will save all parameters in internal non-volatile memory and then reboot. 

It will take roughly 5 or 10 seconds to complete the whole process following which a 

new login page will be presented, indicating that the Controller has been updated and 

that NETRS2321E is restarting.
You can re-login and check if all parameters have been correctly saved. Once you have 

confirmed accuracy, you can close the browser.
NOTE: If the domain under which NETRS2321E is operating is different from that of the 

computer running the browser, the login page won’t appear unless the NETRS2321E 

Gateway Address has correctly been set.

The virtual COM port software, VSerPortConsole, is used to map a NETRS2321E unit on 

the network, to a COM port on the local computer system.  The computer will treat the 

COM port as a regular serial port that is directly on the computer system.  To use the 

virtual COM port feature:
1.  Ensure that the NETRS2321E unit has already been configured properly, and is 

accessible on the network.

2.  Copy the virtual COM port software onto the computer’s hard drive from the CD, if 

not already and run the software.  Make sure to only run the version appropriate for 

your operating system.

NOTE: The latest version of the virtual COM port software can be downloaded from 

www.startech.com