Справочник Пользователя для StarTech.com SV1107IPEXT

Instruction Manual

20

To enable IP and/or MAC filtering, place a checkmark in the 

Enable and/or MAC Filter Enable checkbox. There is a maximum of 100 
filters allowed for each option.

If the 

•

include button is checked, all the addresses within the filter  

  range are allowed access to the SV1107IPEXT.  Addresses 

not  

  specified within the filter will be 

denied access.

If the 

•

exclude button is checked, all the addresses within the filter  

  range are denied access to the SV1107IPEXT.  Addresses 

not  

  specified within the filter will be 

allowed access.

To add an IP Address filter:

Click 

1. 

Add. A dialog box similar to the one below appears:

Specify the filter address in the dialog box, then click 

2. 

OK.  A second  

  dialog box, similar to the one below, appears:

To filter a single IP address, key in the same address as the start IP  

3. 
  Address. To filter a continuous range of addresses, key in the end  
  number of the range.

After filling in the address, click 

4. 

OK.

Repeat these steps for any additional IP addresses you wish to filter.

5.