Справочник Пользователя для Fortinet 5003

The external switch requires the following configuration settings. Example 
commands are shown for an HP procurve 3500yl switch with interfaces A1 and A4 
connected to the FortiSwitch-5003A boards. This external switch acts as the root 
for spanning tree instance 0.

Create an MSTP configuration that includes a name and a revision. For example, 
if the name is tree_1 and the revision is 11:

spanning-tree config-name "tree_1"
spanning-tree config-revision 1

Configure the switch to add VLAN tag 100 to packets from the internal network 
and VLAN tag 101 to packets from the external network and to send packets from 
both networks to the FortiSwitch-5003A board.

vlan 100

name "VLAN100"
tagged 6,8,19,A1,A4
exit

vlan 101

name "VLAN101"
tagged 5,7,20,A1,A4
no ip address
exit

Add spanning tree instance 3 for packets from the internal network. Add VLAN tag 
100 to this spanning tree instance. Set the priority of this spanning tree instance to 
5.

spanning-tree instance 3 vlan 100
spanning-tree instance 3 priority 5

5050SAP

5000SM

5000SM

Distributed 10-gigabit
data communication
on fabric channels 2
and 3

Three FortiGate-RTM-XB2
modules installed in RTM 
slots 3, 4, and 5 to
provide 10-gigabit
fabric interfaces and
NP2 acceleration for each
FortiGate-5001A  board.

External switch

VLAN

tagged

traffic

Internal and external

10-gigabit networks

connected to

FortiSwitch-5003A

front panel interface F5

and to fabric channels

1 and 2

External
Network

Internal Network