Справочник Пользователя для Avaya 580
Document No. 10-300077, Issue 2
5-23
Configuring SNMP
Disabling or Reenabling SNMP
Disabling SNMP
To disable SNMP, use the following CLI command:
(configure)#
no snmp-server
This command overrides secure mode, which disables SNMPv1 and v2 and
enables SNMPv3. For information on secure mode, see “
enables SNMPv3. For information on secure mode, see “
Reenabling SNMP
To reenable SNMP, use the following CLI command:
(configure)#
snmp-server enable
This command enables the three versions of SNMP: SNMPv1, v2, and v3.
Viewing the SNMP Status
To view the status of SNMP, use the following CLI command:
(configure)#
show snmp
This command displays the status of SNMP (enabled or disabled) and the
administrative contact and physical location of the switch, if set.
administrative contact and physical location of the switch, if set.