Справочник Пользователя для Benq PB2240 2000ANSI 2000:1 XGA Svideo Composite 1.9kgBrightness : 2000 99.J9377.B91
Модели
99.J9377.B91
Operation
27
4. Advance Menu
FUNCTION
DESCRIPTION
Mirror
The projector can be installed on a ceiling or behind a screen, or with one
or more mirrors. Contact your dealer for the ceiling mount bracket
(optional accessory) if you need to install the projector on your ceiling.
or more mirrors. Contact your dealer for the ceiling mount bracket
(optional accessory) if you need to install the projector on your ceiling.
■
Floor front: Select this setting with
the projector set on the floor and
audience viewing the projected
images from the front side of the
screen. This is the most common
setting.
audience viewing the projected
images from the front side of the
screen. This is the most common
setting.
■
Ceiling front: Select this setting
with the projector suspended from
the ceiling and audience viewing the
projected images from the front
side.
the ceiling and audience viewing the
projected images from the front
side.
■
Floor rear: Select this setting when
the projector is placed near the
floor and behind the screen. A
special rear projection screen is
required.
floor and behind the screen. A
special rear projection screen is
required.
■
Ceiling rear: Select this setting
when the projector is suspended
from the ceiling and placed behind
the screen. A special rear projection
screen is required.
from the ceiling and placed behind
the screen. A special rear projection
screen is required.
Blank Time
Determines the length of time before the projector will automatically
shutdown when Blank is activated.
shutdown when Blank is activated.
Source Scan
Sets whether the projector searches automatically for input signals. If the
source scan is on, the projector will scan for input signals in the following
order: Analog RGB --> Video --> S-Video until it acquires a signal. If the
function is not activated, the projector selects the last input signal.
source scan is on, the projector will scan for input signals in the following
order: Analog RGB --> Video --> S-Video until it acquires a signal. If the
function is not activated, the projector selects the last input signal.
Language
Language sets the language for the OSD control menus.
Use
3 Left/ Right 4on the projector or 3/ 4 on the remote control to
select your desired language from among English, French, German, Ital-
ian, Spanish, Russian, Traditional Chinese, Simplified Chinese, Japanese
and Korean.
ian, Spanish, Russian, Traditional Chinese, Simplified Chinese, Japanese
and Korean.
User Logo
Enables the user to select which logo screen will appear during projector
start-up. Three modes are available: Default (BENQ logo), black screen or
blue screen.
start-up. Three modes are available: Default (BENQ logo), black screen or
blue screen.