Справочник Пользователя для Brocade Communications Systems 53-1001761-01
50
Converged Enhanced Ethernet Administrator’s Guide
53-1001761-01
Default STP, RSTP, and MSTP configuration
5
DRAFT: BROCADE CONFIDENTIAL
Default STP, RSTP, and MSTP configuration
lists the default STP, RSTP, and MSTP configuration.
lists the switch defaults that apply only to MSTP configurations.
lists the switch defaults for the 10-Gigabit Ethernet CEE interface-specific configuration.
TABLE 8
Default STP, RSTP, and MSTP configuration
Parameter Default
setting
Spanning-tree mode
By default, STP, RSTP, and MSTP are disabled
Bridge priority
32768
Bridge forward delay
15 seconds
Bridge maximum aging time
20 seconds
Error disable timeout timer
Disabled
Error disable timeout interval
300 seconds
Port-channel path cost
Standard
Bridge hello time
2 seconds
Flush MAC addresses from the VLAN FDB
Enabled
TABLE 9
Default MSTP configuration
Parameter Default
setting
Cisco interoperability
Disabled
Switch priority (when mapping a VLAN to an
MSTP instance)
MSTP instance)
32768
Maximum hops
20 hops
Revision number
0
TABLE 10
Default 10-Gigabit Ethernet CEE interface-specific configuration
Parameter Default
setting
Spanning tree
Disabled on the interface
Automatic edge detection
Disabled
Path cost
2000
Edge port
Disabled
Guard root
Disabled
Hello time
2 seconds
Link type
Point-to-point
Port fast
Disabled
Port priority
128
CEE interface root port
Allow the CEE interface to become a root port.
CEE interface BPDU restriction
Restriction is disabled