Справочник Пользователя для Pioneer k DVD-RW 16x4 int ATAPI 10pk bulk black DVR-108BK?10PK

 

The drive is not supported the Parameters Savable (PS) bit and must be set to zero.   

The Page Code field identifies the format and parameters defined for that mode page.   

The drive supports following Mode pages. 

Page code 

Description 

Section 

01h 

Error Recovery Page  

4.12.2.2   on page 33 

05h 

Write Parameters Page 

4.12.2.5   on page 34 

08h 

Caching Page 

4.12.2.1   on page 33 

0Eh 

CD Audio Control Page 

 

1Ah 

Power Condition Page 

4.12.2.3   on page 33 

1Dh 

Time-out & Protect Page 

4.12.2.4   on page 34 

2Ah 

Capabilities & Mechanical Status Page 

4.12.2.6   on page 35 

3Fh 

Return all pages (valid only for the MODE SENSE command) 

 

 

 The Caching Page is supported for compatibility of other CD-R/RW drive. This page has no effect  on write/read operation. The 
returned Caching parameters by the MODE SENSE (10) Command are modified to the new parameters after receiving new parameters 
by MODE SENSE (10) Command. 

Bit 

Byte 

7 

6 

5 

4 

3 

2 

1 

0 

0 

PS 

Reserved 

Page Code = 08h 

1 

Page Length = 0Ah 

2 

IC 

ABPF 

CAP 

DISC 

SIZE 

WCE 

MF 

RCD 

3 

Demand Read Priority 

Write Retention Priority 

4 

(MSB) 

 

5 

 

Disable Pre-fetch Transfer Length 

(LSB) 

6 

(MSB) 

 

7 

 

Minimum Pre-fetch 

(LSB) 

8 

(MSB) 

 

9 

 

Maximum Pre-fetch 

(LSB) 

10 

(MSB) 

 

11 

 

Maximum Pre-fetch Ceiling 

(LSB) 

Default value of the WCE bit is one. Default value of any other bits and field is zero. 

The AWRE and ARRE bits are not supported and are ignored. 

The TB, RC, DTE and DCR bits are ignored. 

The Write Retry Count field is reserved. 

The PER bit and EMCDR field are used to control the defect reporting. 

The default value of an Idle bit is one. The default value of the Idle Timer field is 00000258h (1 minute). 

The default value of the Standby bit is one. The default value of Standby Timer field is 000012C0h (8 minutes).