Справочник Пользователя для Billion Electric Company BiPAC 3100SN

4.3.4 WPS-Wi-Fi Protected Setup

WPS feature is designed to ease security setup and enabled WiFi networks in small offices or

home. It helps you to set a network and enable security by entering a PIN or pushing the WPS

button.

WPS Config

● WPS Service: Default setting is Disable. If you want to activate this function, please select

Enable

and click

Apply to confirm the setting.

● WPS mode:

There are two methods to connect the network via WPS between AP and Stations:

PIN code or PBC.

♣

PIN: Select PIN (Personal Identification Number) mode to connect to the device.When PIN

mode is selected, it allows you to enter the PIN code or select Enrollee to use the default PIN code

(00000864) which the device uses to authenticate other WPS-enabled wireless devices.

♣

PBC: Select PBC (Push Button Communication) mode to connect to the device.

Note: You can enable WPS PBC mode through WPS configuration interface as above or by

pushing the WPS button of your Wall Plug Ethernet Access Point for more than 2 seconds

and release it. The WPS will establish the wireless connection automatically after the

wireless station also start WPS PBC process.

● Click

Apply to save the change.