Справочник Пользователя для Barco DCS-200

Button States

Figure 4-4.  System Initialization Message 4  (sample)

The “version” line in the above menu shows the software version that is currently installed.  
This version number changes as software upgrades are released.

When you first start up a DCS-200 that has stored logos, a message like the one in the 
following illustration appears during initialization:

Figure 4-5.  LOGO Initialization Message (sample)

After system initialization is complete, the Status Menu appears.

Remember that there are three states for the buttons in the Inputs Section:

Off — the input is not selected for a transition.

Blinking — the blinking status depends on the type of button:

For an input button:

•

When blinking fast, the input is being acquired by the system.  

•

When blinking slow, the input is ready to be transitioned to 
Program.  

For an effect button (BLACK, KEY):

•

When blinking fast, the button’s “auto take” mode is 

, and 

the effect is currently transitioning on or off.

•

When blinking slow, the button’s “auto take” mode is 

, and 

the effect is pending for the next transition.

Lit Solid — the input or the effect is on Program.

Remember also that when you press TAKE, the DCS-200 automatically flip-flops the 
current source on Program with the “pending” source.  Refer to the “

section on page 85 for additional information.

D C S - 2 0 0

B a r c o

V e r s i o n   1 . 0    

I n i t i a l i z i n g . . .

L O G O 1   l o a d i n g . . .

 

5 %