Справочник Пользователя для Barco DCS-200

Using the LOGO

When you first start up a DCS-200 that has stored logos, a message like the one 
in the following illustration appears during initialization:

Figure 4-65.  LOGO Initialization Message (sample)

Ensure that you are familiar with the LOGO Setup Menu.   Refer to the “

” section on page 69 for details.

„

Use the following steps to capture and store a logo:

1.  To capture and store a full-screen logo, first select the input that you wish to store, 

and transition it to Program with a TAKE. 

2.  From the Setup Menu, select LOGO Setup to display the LOGO Setup Menu.

Figure 4-66.  LOGO Setup Menu (sample)

3.  In the Selection field, press SEL and choose the “register” into which you want to 

save the LOGO (e.g., LOGO1, LOGO2 or LOGO3). Press SEL again.

4.  Scroll to the Save Pgm to Logo field, and press SEL to save the input as a full-

screen logo.  

5.  Repeat steps 1 through 4 to save up to two additional logos.  

L O G O 1   l o a d i n g . . .

 

                                                       

5 %

  

LOGO

L O G O   S E T U P

> S e l e c t i o n

L O G O 1
[ E M P T Y ]

S a v e   P g m   t o   L o g o

When a logo is pending or already on Program, the Save 
Pgm to Logo field does not appear.

When a “protected” HDCP source is selected (inputs 7 or 8), 
and an HDCP compliant monitor is connected to the output, 
you cannot save a logo.