Справочник Пользователя для McDATA 3032

McDATA® Sphereon 3032 and 3232 Fabric Switches Installation and Service Manual

•

 reports that the SNMP agent is reinitializing due to a 

switch IPL.

•

 reports access by an unauthorized SNMP 

manager. This trap is configurable, and is disabled by default.

Switch-specific SNMP traps specified in the custom MIB include 
Fibre Channel port operational state changes and FRU operational 
state changes.

If authorized through the Configure SNMP dialog box in the Element 
Manager application, users at SNMP management workstations can 
modify MIB variables. Switch modifications performed through 
SNMP management work stations are recorded in the associated 
Sphereon 3032/3232 Audit Log and are available through the Element 
Manager application.

For additional information, refer to the McDATA OPENconnectors 
SNMP Support Manual (620-000131).

If e-mail notification and call-home support are configured for the 
switch as part of the customer support process, service personnel 
may be:

•

Notified of a switch problem by e-mail message, either directly or 
through a system administrator at the customer site or call center.

•

Assigned a service call from call center personnel upon receipt 
and confirmation of a switch call-home event.

The call-home feature may not be supported on customer-supplied 

server platforms.

This section describes tools and test equipment that may be required 
to install, test, service, and verify operation of the switch and 
attached management server. These tools are supplied with the 
switch or must be supplied by service personnel.

The following tools are supplied with the switch. Use of the tools 
may be required to perform one or more installation, test, service, or 
verification tasks.