Справочник Пользователя для McDATA 3032

Connect the switch to the customer-supplied Ethernet LAN segment 
or the Ethernet hub installed in 

If the switch is delivered (with the Ethernet hub and management 
server) as part of an FC-512 Fabricenter equipment cabinet, this task 
and the following two tasks are not required. Go to 

 on page 2-30.

To connect the desktop or rack-mounted switch to the Ethernet LAN 
segment:

1. Connect one end of the Ethernet patch cable (supplied with the 

switch) to the RJ-45 connector (labeled 10/100) on the left front of 
the chassis.

2. Connect the remaining end of the Ethernet cable to the LAN as 

follows:

a. If the switch is installed on a customer-supplied LAN 

segment, connect the cable to the LAN as directed by the 
customer’s network administrator.

b. If the switch is installed on the Ethernet hub, connect the cable 

to any available port (1x through 11x or 13x through 23x) on 
the hub.

3. Perform one of the following steps:

— If an management server or customer-supplied server 

platform is delivered and available, the Ethernet LAN 
segment does not require connection to the internet. Go to 

page 2-22.

— If an management server or customer-supplied server 

platform is not available and the switch is managed through 
the SANpilot interface, attach the Ethernet LAN segment to an 
internet connection and go to