Справочник Пользователя для Lucent Technologies 1100
Installation
3-8
Issue 1 June 1998
The data settings for the Switch Module’s COM port and the
Remote Module’s COM port must be the same. The factory
settings of the Switch Module’s COM port are the following:
Remote Module’s COM port must be the same. The factory
settings of the Switch Module’s COM port are the following:
Data rate – 38.4 kbps
Data bits – 8
Parity – None
Stop bits - 1
Female Connector on Module
DCD 1
DSR 6
CTS 8
DTR 4
RXO 2
TXI 3
GND 5
RTS 7
Figure 3-2. RS-232D Cable Pin Connections