Справочник Пользователя для Minicom Advanced Systems 5UM70156 V1.1 12
KVM.NET
16
4.3.1.2 The KVM Switches tab elements
Click the KVM Switch tab. The following appears.
Figure 11 KVM Switch tab
The drop-down list consists of pre-defined switch files that you defined in section
4.1 on page 10. Select the KVM switch model (if any) physically connected to this
IP Access unit.
IP Access unit.
4.3.1.3 The Target tab elements
Click the Target tab. The following appears.
KVM switch ports
Figure 12 Targets tab
All the Target servers you created appear in the Targets list. You must associate the
Target servers with the IP Access (where there is no KVM switch) or with the port
numbers on the KVM switch to which they are physically connected.
Target servers with the IP Access (where there is no KVM switch) or with the port
numbers on the KVM switch to which they are physically connected.
To associate Target servers with the ports:
1. From the Targets list, select the desired Target server.
2. Click the port number to which the Target server is physically connected. The
Target name appears alongside the port number, which changes from red to
green.
green.