Справочник Пользователя для Multi-Tech Systems MVPGSM-2
Chapter 3: Software Installation
Multi-Tech Systems, Inc.
MVPGSM
13
6. On the next screen you can select the COM port that the command PC will use when communicating with
the MultiVOIP GSM unit. After software installation, the COM port can be re-set in the MultiVOIP GSM
Software (from the sidebar menu, select Connection | Settings to access the COM Port Setup screen or use
keyboard shortcut Ctrl + G).
Software (from the sidebar menu, select Connection | Settings to access the COM Port Setup screen or use
keyboard shortcut Ctrl + G).
Note: If the COM port setting made here conflicts with the actual COM port resources available in the
command PC, the “Error in Opencomm handle” message will appear when the MultiVOIP GSM program is
launched. If this occurs, you must reset the COM port.
command PC, the “Error in Opencomm handle” message will appear when the MultiVOIP GSM program is
launched. If this occurs, you must reset the COM port.
7. A completion screen will appear.
Completion screen
Click
Finish.
8. When setup of the MultiVOIP GSM software is complete, you will be prompted to run the MultiVOIP GSM
software to configure the VOIP.
Configuration screen
Software installation is now complete.