Справочник Пользователя для Adtran ADT-1234POE
Option Modules
NetVanta 1000/1000R Series Hardware Installation Guide
44
Copyright © 2008 ADTRAN, Inc.
61200500L1-34N
NetVanta SHDSL NIM, Annex A (P/N 1200936E1)
The NetVanta SHDSL NIM, Annex A (shown in Figure 31) provides a WAN SHDSL interface for the
NetVanta. See Table A-10 on page 70 for the SHDSL connector pinouts.
NetVanta. See Table A-10 on page 70 for the SHDSL connector pinouts.
Figure 31. NetVanta SHDSL NIM, Annex A
WAN-SHDSL
ANNEX A
Features and Specifications
Operating Mode
•
Line termination (CO)
•
Network termination (CPE)
SHDSL Interface
•
Supported Standards: ITU-T G.991.2
SHDSL, Annex A
M-pair bonding of 2 pairs - ITU.T
G.991.2
SHDSL, Annex A
M-pair bonding of 2 pairs - ITU.T
G.991.2
•
Line Rate (2-wire mode): 192 to
2304 kbps in 64k increments
2304 kbps in 64k increments
•
Line Rate (4-wire mode): 384 to
4608 kbps in 128k increments
4608 kbps in 128k increments
•
Payload: ATM (AAL5)
•
Line Code: TC-PAM
•
Connector: RJ-45
Clock Source
•
CPE Operating Mode: Network
•
CO Operating Mode: Internal
Diagnostics
•
Network loopbacks (local and remote)
•
Alarm generation and detection
•
Programmable alarm threshold setting for
loop attenuation and signal-to-noise ratio
loop attenuation and signal-to-noise ratio
Compliance
•
•
ACTA/FCC Part 68
•
UL/CUL 60950
•
RoHS compliant (Telecommunications
exemption)
exemption)
Environmental
•
Operating Temperature: 0°C to 50°C
•
Storage Temperature: -20°C to 70°C
•
Relative Humidity: Up to 95 percent,
noncondensing
noncondensing
Physical
•
Dimensions: 2.75-inch W x 4.25-inch D