Справочник Пользователя для Acer G701
3 Upgrading the system
40
Installing the hot-swappable cage
1
Detach the chassis panels and remove the air baffle.
2
Connect the following cables to the SCSI backplane board:
a
SCSI cable
b
SCSI drive power cable
c
SCSI drive fault LED cable
3
Attach the other end of these cables to the corresponding
connectors on the mainboard.
connectors on the mainboard.
Refer to “Mainboard layout” on page 10 for the location of the
connectors.
connectors.
4
Insert the hot-swappable cage into the housing (2), then tighten
the four thumbscrews to secure it to the chassis (1).
the four thumbscrews to secure it to the chassis (1).
5
Reinstall the air baffle and the chassis panels.
AA G701 - EN.book Page 40 Tuesday, February 25, 2003 5:19 PM