Справочник Пользователя для Acer G700 series

89

To set a Supervisor/User password

1

Use the up/down keys to highlight a password parameter 
(Supervisor Password or User Password) then press Enter. 

A password box will appear.

2

Type a password then press Enter. 

The password may consist of up to six alphanumeric characters 

 

(A-Z, a-z, 0-9).  

3

Retype the password to verify the first entry then press Enter 
again. 

After setting the password, the system automatically sets the 
chosen password parameter to Installed. 

To change the Supervisor/User password

1

Use the up/down keys to highlight either change password 
parameters (Change Supervisor Password or Change User 
Password) then press Enter. 

2

Type the original password then press Enter. 

3

Type a new password then press Enter. 

4

Retype the password to verify the first entry then press Enter 
again.

To remove the User password

1

Use the up/down keys to highlight the Clear User Password 
parameter then press Enter.

2

Enter the current password then press Enter.

3

Press Enter twice without entering anything in the new and 
confirm password fields. 

After doing this, the system automatically sets the User password 
parameter to Not Installed.

Clear User 
Password

Press Enter to remove the User 

 

password.

AA G701 - EN.book  Page 89  Tuesday, February 25, 2003  5:19 PM