Справочник Пользователя для Acer G610
61
Installing expansion cards
There are two kinds of expansion slots available on your system board:
PCI (Peripheral Component Interconnect) and AGP (Accelerated
Graphics Port).
PCI (Peripheral Component Interconnect) and AGP (Accelerated
Graphics Port).
To install an expansion card:
1
Remove the housing panels. Refer to page 38 for more detailed
instructions.
instructions.
2
Locate an empty expansion slot on the system board.
3
Remove the metal bracket opposite the selected empty expansion
slot by removing the screw that holds the bracket to the housing
then pulling out the bracket.
slot by removing the screw that holds the bracket to the housing
then pulling out the bracket.
4
Remove the expansion card from its protective packaging.
5
Align the card in the empty bracket. Make sure that the card is
properly seated.
properly seated.
AA G600.book Page 61 Thursday, August 23, 2001 2:31 PM