Справочник Пользователя для Acer MU.R230E.001

43

(3) Connect the other end of the SAS/SATA2 cable to the 

SAS1-1 connector of the SAS controller board.

4

Remove the HDD cage bay plastic cover from the front bezel. 

(1) Use a flat-blade screwdriver to disengage the tabs on the top 

edge of the cover from its bezel slots.

(2) Detach the cover from the bezel.

Store this cover for future reinstallation.

5

Observe the post-installation instructions described on page 38. 

For instructions on how to install a hard drive in an easy-swap HDD 
cage, go to page 47.

For instructions on how to install a hard drive in a hot-plug HDD 
cage, go to page 45.