Справочник Пользователя для Acer MU.R230E.001
3 System upgrade
62
Installing the SAS controller board
If you intend to install a SAS hard drive, you need to first install the
LSI 1068 SAS controller board option.
LSI 1068 SAS controller board option.
To install the SAS controller board:
1
Perform the pre-installation instructions described on page 37.
2
Locate the SODIMM slot. If necessary, remove any cables that
prevent access to it.
prevent access to it.
3
Remove the SAS controller board from its protective packaging,
handling it by the edges.
handling it by the edges.
4
Install the SAS controller board.
(1) Align then insert the gold-lined edge of the board into the
SODIMM slot.
(2) Firmly press the board down to seat it properly.
(3) Secure the board with the one screw.
5
Observe the post-installation instructions described on page 38.
When you turn on the system, the BIOS setup automatically
detects and assigns resources to the new device.
detects and assigns resources to the new device.
For information on how to install a SAS HDD, go to page 45.