Справочник Пользователя для Acer G300
41
3
Attach one side of the fan/heatsink metal bracket to the CPU
socket and then gently push down the other side of the metal
bracket until it locks in place.
socket and then gently push down the other side of the metal
bracket until it locks in place.
4
Connect the 3-pin fan/thermal cable to the system board. Refer to
section “System board layout” on page 23 for the location of the
fan/thermal connectors.
section “System board layout” on page 23 for the location of the
fan/thermal connectors.
Note: The heatsink becomes very hot when the system is on.
NEVER touch the heatsink with any metal or with your hands.
NEVER touch the heatsink with any metal or with your hands.
Removing a CPU
Follow these steps to remove a CPU:
1
Disconnect the 3-pin fan/heatsink cables from the system board.
2
Unhook one side of the fan/heatsink metal bracket and gently lift
it before removing the other side.
it before removing the other side.