Справочник Пользователя для Acer G901
91
Diskette drive
Replacing the diskette drive
1
Turn off power to the server and unplug the AC power cords from
the power source.
the power source.
2
3
Remove the fan modules and the foam fan baffle (refer to
page 86).
page 86).
4
Disconnect the power and signal cables from the back of the
diskette drive.
diskette drive.
5
Remove the screw that secures the diskette drive bracket to the
chassis.
chassis.
6
Remove the bracket and drive assembly from the inside of the
front subchassis.
front subchassis.
7
Position the drive and bracket so that the bottom of the bracket is
facing up.
facing up.
8
Holding the front of the drive with one hand, tilt the front of the
bracket up to disengage the locating pins on each side of the
bracket from the drive.
bracket up to disengage the locating pins on each side of the
bracket from the drive.
9
Slide the bracket back and remove it from the drive.
Figure 48 - Removing the diskette drive
BB!H:11!vh!.!FO/cppl!!Qbhf!:2!!Gsjebz-!Kbovbsz!28-!3114!!8;24!QN