Справочник Пользователя для Acer G901

 3 Hardware configuration

102

7

8

Remove the two plastic rivets and the plastic overlay from the 
power distribution board. 

9

Attach the plastic overlay to the new power distribution board 
using the two plastic rivets.

10 Grasp the new power distribution board and overlay with the 

power supply connectors facing the power supply bays.

11 Tilt the edge of the power distribution board in your hand about 

30° and gently slide the other edge of the board into the four slots 
in the power supply bays.

12 When the board is inserted all the way into the slots, tilt the board 

down so the four mounting holes on the edge of the board are 
aligned with the corresponding holes in the main chassis.

13 Tighten the four screws to secure the power distribution board to 

the main chassis.

14 Install the power supplies.

15 Install the electronics bay (refer to page 49).

16 Connect the cables to the power distribution board and 

mainboard.

17 Close the front subchassis and electronics bay.

18 Install the front and rear access covers (refer to page 46 and 

A

Power supply module

B

Screws

BB!H:11!vh!.!FO/cppl!!Qbhf!213!!Gsjebz-!Kbovbsz!28-!3114!!8;24!QN