Справочник Пользователя для Acer G901
3 Hardware configuration
46
To remove the front access panel
1
2
Release the two captive panel screws (Figure 13, A).
3
Lift the rear edge of the panel slightly and slide it toward the rear
of the chassis.
of the chassis.
4
Lift the panel up and off of the chassis.
To install the front access panel
Note: Before installing the front access panel, check that you
have not left tools or loose parts inside the system.
have not left tools or loose parts inside the system.
1
Position the panel on the chassis so that the panel tabs align with
the chassis slots.
the chassis slots.
2
While lightly pressing the panel against the chassis, slide it toward
the front of the chassis until the panel tabs fully engage the chassis
slots.
the front of the chassis until the panel tabs fully engage the chassis
slots.
3
Attach the panel to the chassis with the captive screws.
4
Figure 13 - Removing the front access panel
BB!H:11!vh!.!FO/cppl!!Qbhf!57!!Gsjebz-!Kbovbsz!28-!3114!!8;24!QN