Справочник Пользователя для Acer G901
3 Hardware configuration
52
To install the access cover to the system boards
1
Orient the access cover with the captive screws toward the front of
the server.
the server.
2
Insert the tabs on the rear of the cover into the slots at the rear of
the chassis.
the chassis.
3
Press down gently and tighten the captive screws at the front of
the cover.
the cover.
Memory board
To remove the memory board
1
Grasp the bracket on the top edge of the memory board and pull
straight up until the board disengages from the connector on the
processor board.
straight up until the board disengages from the connector on the
processor board.
2
Lift the memory board out of the chassis.
Figure 18 - Removing the memory board
BB!H:11!vh!.!FO/cppl!!Qbhf!63!!Gsjebz-!Kbovbsz!28-!3114!!8;24!QN