Справочник Пользователя для Acer G901

57

  

9

Remove the six screws, the plastic overlay, and the two processor 
board mounting brackets that attach the mainboard to the 
electronics bay (Figure 23, A).

10 Lifting the board slightly, slide the mainboard toward the front of 

the chassis until the I/O ports clear the chassis.

11 At one side of the chassis, the board is inserted into slots in a foam 

panel (Figure 23, B).  Lift up on the opposite end of the board and 
pull the edge of the board out of the slots in the foam panel.  

12 Lift the mainboard out of the electronics bay and place it 

component-side up on a nonconductive, static-free surface (or in 
an antistatic bag).

A

Tabs (3) on retention 
mechanism

C

Overlay tab (1 of 2)

B

Protective overlay

D

Overlay screw

  Figure 23 - Mainboard mounting

BB!H:11!vh!.!FO/cppl!!Qbhf!68!!Gsjebz-!Kbovbsz!28-!3114!!8;24!QN