Справочник Пользователя для HP (Hewlett-Packard) ML110 G6

 

 

Removal and replacement procedures  27  

 

 

Removal and replacement procedures 

Required tools 

In performing any hardware configuration procedure you may need the following tools:  

• 

Phillips screwdriver (for installation in the second removable drive bay) 

• 

T-15 Torx screwdriver (for processor replacement) 

• 

Flat-blade screwdriver (for system battery replacement) 

The following references and software tools may also be used:  

• 

• 

IPMI Event Log 

• 

Diagnostics software 

Server warnings and cautions 

Before installing a server, be sure that you understand the following warnings and cautions. 

 

 

WARNING:

 To reduce the risk of personal injury from hot surfaces, allow the drives and the internal 

system components to cool before touching them. 

 

 

CAUTION:

 The server must always be operated with the system covers on. Proper cooling is not 

achieved when the system covers are removed. 

 

 

CAUTION:

 Whenever installing hardware or performing maintenance procedures requiring access 

to internal components, it is recommended that users first back up all server data to avoid loss. 

 

 

IMPORTANT:

 Before removing any serviceable parts, determine whether the part is hot-plug or non-

hot-plug. If the device is non-hot-plug, you must power down the server. Non-hot-plug devices in the 

server include the processor, all boards, memory modules, fans, expansion boards, and all system 

drives. 

 

 

IMPORTANT:

 Review the specifications of a new component before installing it to make sure it is 

compatible with the server. When you integrate new components into the system, record its model 

and serial number, and any other pertinent information for future reference. After completing any 

removal or replacement procedure, run the diagnostics program to verify that all components 

operate properly.