Справочник Пользователя для Fujitsu RX900 S1
RX900 S1
Maintenance Manual
265
Baseboard
14.2.2 Starting the task
Ê
Perform the following procedures:
1.
2.
3.
4.
5. If required to access the installation place: Remove the expansion cards,
see
I
Before removing the expansion cards, take a note on the
installation slot number for each card. Make sure that you reinstall
the card in the slot it was located before the replacement.
installation slot number for each card. Make sure that you reinstall
the card in the slot it was located before the replacement.
14.2.3 Inserting the UFM
Figure 164: Preparing the UFM board
Server-specific installation rules are:
●
Only the nylon screw (1) and the UFM board (2) are used from the available
UFM installation kit, see
UFM installation kit, see
●
The metal spacer is already installed in the baseboard.