Справочник Пользователя для Fujitsu TX200 S6
![Fujitsu](https://files.manualsbrain.com/attachments/6c4642b33d2edbd09f94719c20a133aa0e862902/common/fit/150/50/80a45702a21fefb1823bce6851e87db450dccf7792cb572ebc8a90330a68/brand_logo.png)
78
Operating Manual
TX200
S6
Starting up and operation
I
If the operating system does not switch the server off automatically, press
the On/Off button for at least four seconds and/or send a control signal
for power button override.
the On/Off button for at least four seconds and/or send a control signal
for power button override.
Other On/Off options
Besides the On/Off button, the server can be switched ON and OFF in the
following ways:
following ways:
–
Timer-controlled switch-on/off
Using the ServerView Operations Manager or iRMC S2, you can configure
that the server is switched on/off controlled by timer.
that the server is switched on/off controlled by timer.
–
Ring indicator
The server is switched on by an internal or external modem.
–
Wake up On LAN (WOL)
The server is switched on by a command via the LAN (Magic Packet
TM
).
–
After power failure
The server automatically reboots following a power failure (depending on the
settings in the BIOS or in iRMC S2).
settings in the BIOS or in iRMC S2).
–
Power button override
The system can be switched off by pressing and holding down the On/Off
button (for approximately 4 - 5 seconds).
button (for approximately 4 - 5 seconds).
V
CAUTION!
There is a risk that data may be lost.
–
iRMC S2
iRMC S2 offers various options for switching the server on and off, e.g. via
the
the
Power On Off
page of the iRMC S2 Web interface.