Справочник Пользователя для Fujitsu N800
24
U41243-J-Z156-1-76
Mounting the server in the rack
Installing the server
For the case, that a rack server is installed in a 19-inch rack (without cord
management) an articulated cable guide must be mounted at the device:
management) an articulated cable guide must be mounted at the device:
Figure 7: Mounting the articulated cable guide
Ê
Insert two spring nuts in the groove of the rear right support upright at the
same height with the connection cables of the server.
same height with the connection cables of the server.
Ê
Fix the cable guide with two mounting screws on the rear right support
upright of the rack (1).
upright of the rack (1).
The articulated cable guide should now be mounted as shown in the figure.
Ê
Slide the server into the rack.
Ê
Fasten the server to the rack using the four knurled screws.
2
1