Справочник Пользователя для Fujitsu MX130 S2

MX130 S2

Upgrade and Maintenance Manual

145

The PRIMERGY MX130 S2 server features one system fan module.

I

Additional fans in PSU and processor heat sink cannot be replaced 
individually.

V

Since the system fan is not redundant is has to be replaced immediately 
in case of defects or pre-failure events.

V

●

Do not damage or modify internal cables or devices. Doing so may 
cause a device failure, fire, or electric shock. 

●

Devices and components inside the server remain hot after 
shutdown. After shutting down the server, wait for hot components to 
cool down before installing or removing internal options. 

●

Circuit boards and soldered parts of internal options are exposed and 
can be damaged by static electricity. Always discharge static build-up 
(e.g. by touching a grounded object) before handling electrostatic-
sensitive devices (ESDs). 

●

Do not touch the circuitry on boards or soldered parts. Hold circuit 
boards by their metallic areas or edges. 

●

If devices are installed or disassembled using methods other than 
those outlined in this chapter, the warranty will be invalidated. 

●

For further information, please refer to chapter 

.