Справочник Пользователя для Lucent Technologies 555-233-115
DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r
Upgrades and Additions for R8r
555-233-115
Issue 1
April 2000
Upgrading R5r/R6r/R7r to R8r without Adding Memory
2-14
Upgrade the software and hardware
2
Verify Interchange (H/C only)
1. Type status spe and press
Enter
to make sure the standby side is ready for
interchange:
■
The
Standby Refreshed
field shows yes
■
The
Standby Shadowing
field shows on
■
The
Standby Handshake
field shows up
If the standby SPE does not fully return to service, refer to the STBY-SPE
Maintenance Object section in the
Maintenance Object section in the
Maintenance book.
Upgrade Other Carrier (H/C only)
To upgrade the other carrier, lock the SPE switches on the DUPINT to the other
carrier.
carrier.
NOTE:
The new active carrier resets (reset 1). Wait until the login prompt appears,
then log in.
then log in.
Repeat the steps from
Affix position label(s)
1. Place the new strip label(s) over the old carrier label(s).
Verify software version
NOTE:
The
Tape Resident
field shows the software load number. Write it down
for use later.
If standard reliability:
1. Type list configuration software-version and press
Enter
to verify that the
removable media contains the Release 8 software.
If high or critical reliability:
1. Type list configuration software-version long and press
Enter
to verify
that the removable media contains the Release 8 software.