Справочник Пользователя для Panasonic FP

Dial-In Setup for PPP-Server

FP Web-Server V2.11

124

Null modem driver installation:

1. Locate the file "mdmcisc2.inf" on the setup-CD. Copy it to a temporary folder

2. Open the Control Panel of windows and double-click on the 'Modems' icon

3. If a modem is already installed click [Add]

4. Activate the checkbox "Don't detect my modem" and select [Next]

5. Click

[Have

Disk]

6. Select [Browse] and locate the temporary folder of "mdmcisc2.inf" and click

[OK]

7. Select "Generic NULL Modem" and click [OK]

8. Select the COM port of the computer to be used (i.e. COM2) and select [OK]

9. Back on the main modems screen, select the new "Generic NULL Modem"

and click 'Properties'

10. Set the maximum speed to the same value as specified in the FP Web-Server

configuration (i.e. 38400)

11. Reboot the computer

Remote Dialup Network Setup:

1. Start

→ Programs → Accessories → Communications → Dialup Networking

2. Create a new connection (double-click on New icon)

3. Enter a name, e.g. "FP Web-Server null modem cable"

4. Select "Generic Null Modem" device

5. [Next]

6. Enter any number in the telephone number field. Click [Next] and [OK]

7. Back on the main 'Dial-up Networking': With the right mouse button click on

new icon and select 'Properties'

8. Select 'Server' tab and select "PPP: Internet, Windows NT Server, Windows

98" from the pull-down menu

9. Under 'Advanced option', deactivate "enable software compression" and

turn OFF "require encrypted password"

10. Under 'Protocol' select 'TCP/IP' only. Deselect 'NetBEUI' and 'IPX/SPX'

11. [OK]

'Dial-up' and test the FP Web-Server:

1. On the main 'Dial-up Networking' screen double-click on the new icon "FP

Web-Server null modem cable"

2. Enter the name and password as defined in the FP Web-Server configuration

(see above)