Справочник Пользователя для Panasonic FP
Additional Information
FP Web-Server V2.11
170
15.6 Preinstalled Passwords and Safety Instructions
User name and password can be preset in the Configurator project.
Overview of the preset passwords:
Service
User Name:
Password:
Factory
Default
Factory
Default
Telnet
tel user
tel user
FTP
ftp user
ftp user
PPP
ppps user ppps user
HTML Pages and PLC Data
web
user
web
user
The use of capital letter or small letters in the user name and passwords are not analyzed, i.e.
the user name and password check are not case sensitive. User name and password should
have 1 to 9 characters. Only ASCII characters are allowed. Do not use umlauts or Japanese
characters.
the user name and password check are not case sensitive. User name and password should
have 1 to 9 characters. Only ASCII characters are allowed. Do not use umlauts or Japanese
characters.
Exception:
For a remote dial-up connection (PPP connection) only lower case letters are to be entered for
the password on the client's side. For further information also see Control Buttons/ User Name
and Password.
the password on the client's side. For further information also see Control Buttons/ User Name
and Password.
To clear all passwords (and the complete configuration) see Clearing Passwords (see page
165).
165).
1. Always change the password. Leaving the default password can cause
security problems. For the definition of the user name and the password see
also Password Protection in the online help under the keyword "User Name
and Password".
also Password Protection in the online help under the keyword "User Name
and Password".