Справочник Пользователя для Panasonic FP

FP Web-Server V2.11 

 

5.2 Ethernet IP Configuration 

53 

Every Ethernet participant must have an individual IP address. This address may not be used a 
second time in the same network. The IP address consists of 4 numbers (any 0 to 255, see also 
IP and TCP/ IP (see page 166)). The first numbers define the network address, the other 
numbers define the participant's address. 

 

The IP address of the FP Web-Server can be fixed or it can be allocated dynamically by using a 
DHCP-Server. 

1.  In a "self set-up" network (see page 168) (e.g. with only one hub) the fixed IP 

In many cases a class C network is used. The network is identified by 3 numbers. 
The participants (Computers, Units, FP Web-Server...) are distinguished by the last 
number (1 to 254), e.g. 192.168.206.1 to 192.168.206.254. 

In case this network is connected to a second network via a gateway (e.g. the 
computer for configuration might be in this network), the gateway address also 
needs to be specified, e.g.: 

Computer in x.y.206.z Network with Netmask 255.255.255.0, using the x.y.206.1 
Gateway.  

FP Web-Server in x.y.60.z Network with the following settings: 

- IP Add=x.y.60.31 

- Netmask=255.255.255.0 

- Gateway=x.y.60.1 

- Is there a DHCP-Server in the network? If NOT: 

- IP address: Which fixed IP address can be assigned to the FP Web-Server? 

- Netmask: How is the network address set up (length of the network address and/ 

or the participant's address)?