Справочник Пользователя для Perle Systems 5500161-40

 101

Advanced

From the 

 tab, if you click the 

 or 

 button, you will be able to add a new or edit an 

existing route.

Configure the appropriate parameters:

Specify the type of route you want to configure.

z

Host—A route defined for accessing a specific host external to your local 
network.

z

Network—A route defined for accessing a specific network external to 
your local network.

z

Default—A route which provides general access beyond your local 
network.

Default: Default

When the route 

 is defined as 

, this field will contain the IP address of 

the host. If the route 

 is defined as 

, the network portion of the IP 

address must be specified and the Host port of the address will be set to 0. 
Example: to access network 10.10.20, the address 10.10.20.0 would be 
specified in this field.

Format: IPv4 or IPv6 address

IPv4 Subnet Mask When the route is a 

 route, you must specify the network’s subnet 

mask.

If the IP address is IPv6, then you must specify the network’s prefix bits.

Range: 0-128

Select this option when a host is being used at the route gateway.

Default: Enabled, None