Справочник Пользователя для Perle Systems 5500161-40

Serial Port Profiles

190 

IOLAN SDS/SCS/STS/MDC User’s Guide, Version 4.0

The 

 profile configures a serial port to allow a remote user to establish a SLIP 

connection to the IOLAN’s serial port. This is typically used with a modem for dial-in or dial-out 
access to the network.

Configure the following parameters:

The IPv4 address of the IOLAN end of the SLIP link. For routing to work you 
must enter an IP address in this field. Choose an address that is part of the same 
network or subnetwork as the remote end; for example, if the remote end is 
address 192.101.34.146, your local IP address can be 192.101.34.145. Do not 
use the IOLAN’s (main) IP address in this field; if you do so, routing will not 
take place correctly.

The IPv4 address of the remote end of the SLIP link. Choose an address that is 
part of the same network or subnetwork as the IOLAN. If your user is 
authenticated by the IOLAN, this remote IP address will be overridden if you 
have set a 

 for the user. If your user is authenticated by 

RADIUS and the RADIUS parameter 

 is set in the RADIUS 

file, the IOLAN will use the value in the RADIUS file in preference to the 
value configured here.

The network subnet mask. For example, 255.255.0.0. If your user is 
authenticated by RADIUS and the RADIUS parameter 

 is set 

in the RADIUS file, the IOLAN will use the value in the RADIUS file in 
preference to the value configured here.