Справочник Пользователя для Perle Systems 5500161-40

 205

Adding/Editing Users

The 

 tab configures the connection parameters for a user. Any connection parameters 

configured in this window will override the serial port connection parameters.

When a 

profile is set for the serial port and 

 has been selected, user’s 

accessing the IOLAN through the serial port will be authenticated. Once authentication is successful, 
the 

 specified here is started. For example, if the 

 is specified, the IOLAN will 

start a Telnet connection to the specified 

/

 after the user is successfully authenticated 

(logs in successfully).

Within the 

 profile, there are a number of settings that apply to possible 

. Once it is 

known which user is connected, and which service is to be used, then the settings from both the 

 profile and the user are used. User parameters take precedence over serial port parameters.

Configure the following parameters:

Used in conjunction with the 

. After the user has successfully 

been authenticated, the specified service is started.

Data Options: DSPrompt, Telnet, SSH, RLogin, SLIP, PPP, TCP Raw, SSL 
Raw

Default: DSPrompt

When the 

 is set to 

 or 

, the target host IP 

address. If no IP address is specified, the 

 value in the 

 

configuration will be used. 

Default: None