Справочник Пользователя для Perle Systems 5500161-40

Скачать
Страница из 424
RADIUS and TACACS+  351
RADIUS
Mapped RADIUS Parameters to IOLAN Parameters
When authentication is being done by RADIUS, there are several 
Serial Port
 and 
User
 parameters 
that can be set by the RADIUS server. Any parameters sent by that RADIUS server that are not 
supported by the IOLAN are discarded. Below is a list of the RADIUS parameters and their IOLAN 
parameters:
Service-Type
This has no IOLAN field, although it needs 
to be set to 
Framed-User
 in the RADIUS 
server.
Framed-Protocol
Set to SLIP or PPP service.
Framed-Address
Remote IP Address field under either SLIP 
or PPP.
Caution: the exception to the above rule is 
Framed-Address
 value of 
255.255.255.254. When this value is 
specified in the RADIUS file, the unit will 
use the Remote IP address configured for a 
PPP line in the IOLAN.
Framed-Netmask
IPv4 Subnet Mask
 field under either 
SLIP
 
or 
PPP
.
Framed-Compression
VJ Compression
 field under either 
SLIP
 or 
PPP
.
Framed-MTU
MTU
 field under 
SLIP
.
MRU
 field under 
PPP
.
Idle-Timeout
Idle Timeout
 under the serial port 
Advanced
 settings.
Login-Service
Corresponds to one of the following 
User 
Service
 parameters: 
Telnet
Rlogin
TCP
 
Clear
SSH
, or 
SSL Raw
.
Session-Timeout
Session Timeout
 under the serial port 
Advanced
 settings.
Callback-Number
Combination of the 
Enable Callback
 and 
Phone Numbe
r fields under 
User
Advanced
 settings.
Callback-ID
Combination of the 
Enable Callback
 and 
Phone Numbe
r fields under 
User
Advanced
 settings.
RADIUS Parameter
IOLAN Parameter