Справочник Пользователя для Perle Systems 5500161-40

Setting Jumpers  381

Introduction

To change the settings, do the following:

Unplug the IOLAN from the electrical outlet and disconnect everything from the box.

Open the case by unscrewing the two side screws, one on each side, and lifting off the top of the 
case. You should see the following: 

Power

DIP

 

Switch

Reset

RJ45

Screw

Screw

The pin with the 
square represents 
Pin 1 --->             

The following table describes how to jumper the pins for line termination, fixed 5V output, and 
for output equal to the external adapter input:

Jumper J7 and J8

J4, jumper pins 1 & 2

J4, jumper pins 2 & 3

Jumper J9 and J11

J5, jumper pins 1 & 2

J5, jumper pins 2 & 3

Jumper J22 and J24

J10, jumper pins 1 & 2

J10, jumper pins 2 & 3

Jumper J23 and J25

J6, jumper pins 1 & 2

J6, jumper pins 2 & 3

Close the IOLAN case by replacing the case lid and the two screws. You can now power it on 
with the new settings.